home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Workbench Add-On
/
Workbench Add-On - Volume 1.iso
/
BBS-Archive
/
Dev
/
gcc263-src.lha
/
gcc-2.6.3
/
config
/
elxsi
/
elxsi.h
< prev
next >
Wrap
C/C++ Source or Header
|
1993-10-02
|
36KB
|
987 lines
/* Definitions of target machine for GNU compiler. Elxsi version.
Copyright (C) 1987, 1988, 1992 Free Software Foundation, Inc.
This port, done by Mike Stump <mrs@cygnus.com> in 1988, and is the first
64 bit port of GNU CC.
Based upon the VAX port.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Names to predefine in the preprocessor for this target machine. */
#define CPP_PREDEFINES "-Delxsi -Dunix -Asystem(unix) -Acpu(elxsi) -Amachine(elxsi)"
/* Print subsidiary information on the compiler version in use. */
#define TARGET_VERSION fprintf (stderr, " (elxsi)");
/* Run-time compilation parameters selecting different hardware subsets. */
extern int target_flags;
/* Macros used in the machine description to test the flags. */
/* Nonzero if compiling code that Unix assembler can assemble. */
#define TARGET_UNIX_ASM (target_flags & 1)
/* Macro to define tables used to set the flags.
This is a list in braces of pairs in braces,
each pair being { "NAME", VALUE }
where VALUE is the bits to set or minus the bits to clear.
An empty string NAME is used to identify the default VALUE. */
#define TARGET_SWITCHES \
{ {"unix", 1}, \
{"embos", -1}, \
{ "", TARGET_DEFAULT}}
/* Default target_flags if no switches specified. */
#ifndef TARGET_DEFAULT
#define TARGET_DEFAULT 1
#endif
/* Target machine storage layout */
/* Define this if most significant bit is lowest numbered
in instructions that operate on numbered bit-fields.
This is not true on the vax. */
#define BITS_BIG_ENDIAN 0
/* Define this if most significant byte of a word is the lowest numbered. */
#define BYTES_BIG_ENDIAN 1
/* Define this if most significant word of a multiword number is numbered. */
#define WORDS_BIG_ENDIAN 1
/* Number of bits in an addressable storage unit */
#define BITS_PER_UNIT 8
/* Width in bits of a "word", which is the contents of a machine register.
Note that this is not necessarily the width of data type `int';
if using 16-bit ints on a 68000, this would still be 32.
But on a machine with 16-bit registers, this would be 16. */
#define BITS_PER_WORD 64
#define Rmode DImode
#define INT_TYPE_SIZE 32
#define LONG_TYPE_SIZE 32
#define LONG_LONG_TYPE_SIZE 64
#define FLOAT_TYPE_SIZE 32
#define DOUBLE_TYPE_SIZE 64
#define LONG_DOUBLE_TYPE_SIZE 64
/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD 8
/* Width in bits of a pointer.
See also the macro `Pmode' defined below. */
#define POINTER_SIZE 32
/* Allocation boundary (in *bits*) for storing pointers in memory. */
#define POINTER_BOUNDARY 32
/* Allocation boundary (in *bits*) for storing arguments in argument list. */
#define PARM_BOUNDARY 32
/* Allocation boundary (in *bits*) for the code of a function. */
#define FUNCTION_BOUNDARY 8
/* Alignment of field after `int : 0' in a structure. */
#define EMPTY_FIELD_BOUNDARY 8
/* Every structure's size must be a multiple of this. */
#define STRUCTURE_SIZE_BOUNDARY 32
/* A bitfield declared as `int' forces `int' alignment for the struct. */
#define PCC_BITFIELD_TYPE_MATTERS 1
/* No data type wants to be aligned rounder than this. */
#define BIGGEST_ALIGNMENT 32
/* Define this if move instructions will actually fail to work
when given unaligned data. */
#define STRICT_ALIGNMENT 0
/* Standard register usage. */
/* Number of actual hardware registers.
The hardware registers are assigned numbers for the compiler
from 0 to just below FIRST_PSEUDO_REGISTER.
All registers that the compiler knows about must be given numbers,
even those that are not normally considered general registers. */
#define FIRST_PSEUDO_REGISTER 16
/* 1 for registers that have pervasive standard uses
and are not available for the register allocator.
On the elxsi, these is the .r15 (aka .sp). */
#define FIXED_REGISTERS {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}
/* 1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
The latter must include the registers where values are returned
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like. */
#define CALL_USED_REGISTERS {1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}
/* Return number of consecutive hard regs needed starting at reg REGNO
to hold something of mode MODE.
This is ordinarily the length in words of a value of mode MODE
but can be less for certain modes in special long registers.
On the vax, all registers are one word long. */
#define HARD_REGNO_NREGS(REGNO, MODE) \
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. */
#define HARD_REGNO_MODE_OK(REGNO, MODE) 1
/* Value is 1 if it is a good idea to tie two pseudo registers
when one has mode MODE1 and one has mode MODE2.
If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
for any hard reg, then this must be 0 for correct output. */
#define MODES_TIEABLE_P(MODE1, MODE2) 1
/* Specify the registers used for certain standard purposes.
The values of these macros are register numbers. */
/* Register to use for pushing function arguments. */
#define STACK_POINTER_REGNUM 15
/* Base register for access to local variables of the function. */
#define FRAME_POINTER_REGNUM 14
/* Value should be nonzero if functions must have frame pointers.
Zero means the frame pointer need not be set up (and parms
may be accessed via the stack pointer) in functions that seem suitable.
This is computed in `reload', in reload1.c. */
#define FRAME_POINTER_REQUIRED 0
#define INITIAL_FRAME_POINTER_OFFSET(DEPTH) \
{ int regno; \
int offset = 0; \
for( regno=0; regno < FIRST_PSEUDO_REGISTER; regno++ ) \
if( regs_ever_live[regno] && !call_used_regs[regno] ) \
offset += 8; \
(DEPTH) = (offset + ((get_frame_size() + 3) & ~3) ); \
(DEPTH) = 0; \
}
/* Base register for access to arguments of the function. */
#define ARG_POINTER_REGNUM 14
/* Register in which static-chain is passed to a function. */
#define STATIC_CHAIN_REGNUM 0
/* Register in which address to store a structure value
is passed to a function. */
#define STRUCT_VALUE_REGNUM 1
/* Define the classes of registers for register constraints in the
machine description. Also define ranges of constants.
One of the classes must always be named ALL_REGS and include all hard regs.
If there is more than one class, another class must be named NO_REGS
and contain no registers.
The name GENERAL_REGS must be the name of a class (or an alias for
another name such as ALL_REGS). This is the class of registers
that is allowed by "g" or "r" in a register constraint.
Also, registers outside this class are allocated only when
instructions express preferences for them.
The classes must be numbered in nondecreasing order; that is,
a larger-numbered class must never be contained completely
in a smaller-numbered class.
For any two classes, it is very desirable that there be another
class that represents their union. */
/* The vax has only one kind of registers, so NO_REGS and ALL_REGS
are the only classes. */
enum reg_class { NO_REGS, GENERAL_REGS, ALL_REGS, LIM_REG_CLASSES };
#define N_REG_CLASSES (int) LIM_REG_CLASSES
/* Give names of register classes as strings for dump file. */
#define REG_CLASS_NAMES \
{"NO_REGS", "GENERAL_REGS", "ALL_REGS" }
/* Define which registers fit in which classes.
This is an initializer for a vector of HARD_REG_SET
of length N_REG_CLASSES. */
#define REG_CLASS_CONTENTS {0, 0x07fff, 0xffff}
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
#define REGNO_REG_CLASS(REGNO) (REGNO == 15 ? ALL_REGS : GENERAL_REGS)
/* The class value for index registers, and the one for base regs. */
#define INDEX_REG_CLASS GENERAL_REGS
#define BASE_REG_CLASS GENERAL_REGS
/* Get reg_class from a letter such as appears in the machine description. */
#define REG_CLASS_FROM_LETTER(C) NO_REGS
/* The letters I, J, K, L and M in a register constraint string
can be used to stand for particular ranges of immediate operands.
This macro defines what the ranges are.
C is the letter, and VALUE is a constant value.
Return 1 if VALUE is in the range specified by C. */
#define CONST_OK_FOR_LETTER_P(VALUE, C) \
((C) == 'I' ? (VALUE) >=-16 && (VALUE) <=15 : 0)
/* Similar, but for floating constants, and defining letters G and H.
Here VALUE is the CONST_DOUBLE rtx itself. */
#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) 1
/* Given an rtx X being reloaded into a reg required to be
in class CLASS, return the class of reg to actually use.
In general this is just CLASS; but on some machines
in some cases it is preferable to use a more restrictive class. */
#define PREFERRED_RELOAD_CLASS(X,CLASS) (CLASS)
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
/* On the vax, this is always the size of MODE in words,
since all registers are the same size. */
#define CLASS_MAX_NREGS(CLASS, MODE) \
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
/* Stack layout; function entry, exit and calling. */
/* Define this if pushing a word on the stack
makes the stack pointer a smaller address. */
#define STACK_GROWS_DOWNWARD
/* Define this if the nominal address of the stack frame
is at the high-address end of the local variables;
that is, each additional local variable allocated
goes at a more negative offset in the frame. */
#define FRAME_GROWS_DOWNWARD
/* Offset within stack frame to start allocating local variables at.
If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
first local allocated. Otherwise, it is the offset to the BEGINNING
of the first local allocated. */
#define STARTING_FRAME_OFFSET -4
/* Offset of first parameter from the argument pointer register value. */
#define FIRST_PARM_OFFSET(FNDECL) 4
/* Value is 1 if returning from a function call automatically
pops the arguments described by the number-of-args field in the call.
FUNTYPE is the data type of the function (as a tree),
or for a library call it is an identifier node for the subroutine name.
On the Vax, the RET insn always pops all the args for any function. */
#define RETURN_POPS_ARGS(FUNTYPE,SIZE) (SIZE)
/* Define how to find the value returned by a function.
VALTYPE is the data type of the value (as a tree).
If the precise function being called is known, FUNC is its FUNCTION_DECL;
otherwise, FUNC is 0. */
/* On the Vax the return value is in R0 regardless. */
#define FUNCTION_VALUE(VALTYPE, FUNC) \
gen_rtx (REG, TYPE_MODE (VALTYPE), 0)
/* Define how to find the value returned by a library function
assuming the value has mode MODE. */
/* On the Vax the return value is in R0 regardless. */
#define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, 0)
/* Define this if PCC uses the nonreentrant convention for returning
structure and union values. */
#define PCC_STATIC_STRUCT_RETURN
/* 1 if N is a possible register number for a function value.
On the Vax, R0 is the only register thus used. */
#define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
/* 1 if N is a possible register number for function argument passing.
On the Vax, no registers are used in this way. */
#define FUNCTION_ARG_REGNO_P(N) 0
/* Define a data type for recording info about an argument list
during the scan of that argument list. This data type should
hold all necessary information about the function itself
and about the args processed so far, enough to enable macros
such as FUNCTION_ARG to determine where the next arg should go.
On the vax, this is a single integer, which is a number of bytes
of arguments scanned so far. */
#define CUMULATIVE_ARGS int
/* Initialize a variable CUM of type CUMULATIVE_ARGS
for a call to a function whose data type is FNTYPE.
For a library call, FNTYPE is 0.
On the vax, the offset starts at 0. */
#define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,x) \
((CUM) = 0)
/* Update the data in CUM to advance over an argument
of mode MODE and data type TYPE.
(TYPE is null for libcalls where that information may not be available.) */
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
((CUM) += ((MODE) != BLKmode \
? (GET_MODE_SIZE (MODE) + 3) & ~3 \
: (int_size_in_bytes (TYPE) + 3) & ~3))
/* Define where to put the arguments to a function.
Value is zero to push the argument on the stack,
or a hard register in which to store the argument.
MODE is the argument's machine mode.
TYPE is the data type of the argument (as a tree).
This is null for libcalls where that information may
not be available.
CUM is a variable of type CUMULATIVE_ARGS which gives info about
the preceding args and about the function being called.
NAMED is nonzero if this argument is a named parameter
(otherwise it is an extra parameter matching an ellipsis). */
/* On the vax all args are pushed. */
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) 0
/* This macro generates the assembly code for function entry.
FILE is a stdio stream to output the code to.
SIZE is an int: how many units of temporary storage to allocate.
Refer to the array `regs_ever_live' to determine which registers
to save; `regs_ever_live[I]' is nonzero if register number I
is ever used in the function. This macro is responsible for
knowing which registers should not be saved even if used. */
#define FUNCTION_PROLOGUE(FILE, SIZE) \
{ register int regno; \
register int cnt = 0; \
extern char call_used_regs[]; \
/* the below two lines are a HACK, and should be deleted, but \
for now are very much needed (1.35) */ \
if (frame_pointer_needed) \
regs_ever_live[14]=1, call_used_regs[14]=0; \
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \
if (regs_ever_live[regno] && !call_used_regs[regno]) \
cnt+=8; \
if ((SIZE)+cnt) \
fprintf (FILE, "\tadd.64\t.sp,=%d\n", -(SIZE)-cnt); \
cnt = 0; \
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \
if (regs_ever_live[regno] && !call_used_regs[regno]) \
fprintf (FILE, "\tst.64\t.r%d,[.sp]%d\n", regno, (cnt+=8)-12); \
if (frame_pointer_needed) \
fprintf (FILE, "\tadd.64\t.r14,.sp,=%d\n", (SIZE)+cnt); \
}
/* Output assembler code to FILE to increment profiler label # LABELNO
for profiling a function entry. */
#define FUNCTION_PROFILER(FILE, LABELNO) \
fprintf (FILE, "\tld.64\t.r0,.LP%d\n\tcall\tmcount\n", (LABELNO));
/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
the stack pointer does not matter. The value is tested only in
functions that have frame pointers.
No definition is equivalent to always zero. */
#define EXIT_IGNORE_STACK 0
/* This macro generates the assembly code for function exit,
on machines that need it. If FUNCTION_EPILOGUE is not defined
then individual return instructions are generated for each
return statement. Args are same as for FUNCTION_PROLOGUE. */
#define FUNCTION_EPILOGUE(FILE, SIZE) \
{ register int regno; \
register int cnt = 0; \
extern char call_used_regs[]; \
extern int current_function_calls_alloca; \
/* this conditional is ONLY here because there is a BUG; \
EXIT_IGNORE_STACK is ignored itself when the first part of \
the condition is true! (atleast in version 1.35) */ \
/* the 8*10 is for 64 bits of .r5 - .r14 */ \
if (current_function_calls_alloca || (SIZE)>=(256-8*10)) { \
/* use .r4 as a temporary! Ok for now.... */ \
fprintf (FILE, "\tld.64\t.r4,.r14\n"); \
for (regno = FIRST_PSEUDO_REGISTER-1; regno >= 0; --regno) \
if (regs_ever_live[regno] && !call_used_regs[regno]) \
cnt+=8; \
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; ++regno) \
if (regs_ever_live[regno] && !call_used_regs[regno]) \
fprintf (FILE, "\tld.64\t.r%d,[.r14]%d\n", regno, \
-((cnt-=8) + 8)-4-(SIZE)); \
fprintf (FILE, "\tld.64\t.sp,.r4\n\texit\t0\n"); \
} else { \
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; ++regno) \
if (regs_ever_live[regno] && !call_used_regs[regno]) \
fprintf (FILE, "\tld.64\t.r%d,[.sp]%d\n", regno, (cnt+=8)-12); \
fprintf (FILE, "\texit\t%d\n", (SIZE)+cnt); \
} }
/* If the memory address ADDR is relative to the frame pointer,
correct it to be relative to the stack pointer instead.
This is for when we don't use a frame pointer.
ADDR should be a variable name. */
#define FIX_FRAME_POINTER_ADDRESS(ADDR,DEPTH) \
{ int offset = -1; \
rtx regs = stack_pointer_rtx; \
if (ADDR == frame_pointer_rtx) \
offset = 0; \
else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 1) == frame_pointer_rtx \
&& GET_CODE (XEXP (ADDR, 0)) == CONST_INT) \
offset = INTVAL (XEXP (ADDR, 0)); \
else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 0) == frame_pointer_rtx \
&& GET_CODE (XEXP (ADDR, 1)) == CONST_INT) \
offset = INTVAL (XEXP (ADDR, 1)); \
else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 0) == frame_pointer_rtx) \
{ rtx other_reg = XEXP (ADDR, 1); \
offset = 0; \
regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \
else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 1) == frame_pointer_rtx) \
{ rtx other_reg = XEXP (ADDR, 0); \
offset = 0; \
regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \
if (offset >= 0) \
{ int regno; \
extern char call_used_regs[]; \
offset += 4; /* I don't know why??? */ \
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \
if (regs_ever_live[regno] && ! call_used_regs[regno]) \
offset += 8; \
ADDR = plus_constant (regs, offset + (DEPTH)); } }
/* Addressing modes, and classification of registers for them. */
/* #define HAVE_POST_INCREMENT */
/* #define HAVE_POST_DECREMENT */
/* #define HAVE_PRE_DECREMENT */
/* #define HAVE_PRE_INCREMENT */
/* Macros to check register numbers against specific register classes. */
/* These assume that REGNO is a hard or pseudo reg number.
They give nonzero only if REGNO is a hard reg of the suitable class
or a pseudo reg currently allocated to a suitable hard reg.
Since they use reg_renumber, they are safe only once reg_renumber
has been allocated, which happens in local-alloc.c. */
#define REGNO_OK_FOR_INDEX_P(regno) \
((regno) < FIRST_PSEUDO_REGISTER || reg_renumber[regno] >= 0)
#define REGNO_OK_FOR_BASE_P(regno) \
((regno) < FIRST_PSEUDO_REGISTER || reg_renumber[regno] >= 0)
/* Maximum number of registers that can appear in a valid memory address. */
#define MAX_REGS_PER_ADDRESS 2
/* 1 if X is an rtx for a constant that is a valid address. */
#define CONSTANT_ADDRESS_P(X) \
(GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
|| GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
|| GET_CODE (X) == HIGH)
/* Nonzero if the constant value X is a legitimate general operand.
It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */
#define LEGITIMATE_CONSTANT_P(X) \
(GET_CODE (X) != CONST_DOUBLE)
/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
and check its validity for a certain class.
We have two alternate definitions for each of them.
The usual definition accepts all pseudo regs; the other rejects
them unless they have been allocated suitable hard regs.
The symbol REG_OK_STRICT causes the latter definition to be used.
Most source files want to accept pseudo regs in the hope that
they will get allocated to the class that the insn wants them to be in.
Source files for reload pass need to be strict.
After reload, it makes no difference, since pseudo regs have
been eliminated by then. */
#ifndef REG_OK_STRICT
/* Nonzero if X is a hard reg that can be used as an index
or if it is a pseudo reg. */
#define REG_OK_FOR_INDEX_P(X) 1
/* Nonzero if X is a hard reg that can be used as a base reg
or if it is a pseudo reg. */
#define REG_OK_FOR_BASE_P(X) 1
#else
/* Nonzero if X is a hard reg that can be used as an index. */
#define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
/* Nonzero if X is a hard reg that can be used as a base reg. */
#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
#endif
/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
that is a valid memory address for an instruction.
The MODE argument is the machine mode for the MEM expression
that wants to use this address.
CONSTANT_ADDRESS_P is actually machine-independent. */
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
{ \
if (GET_CODE (X) == REG) goto ADDR; \
if (CONSTANT_ADDRESS_P (X)) goto ADDR; \
if (GET_CODE (X) == PLUS) \
{ \
/* Handle [index]<address> represented with index-sum outermost */\
if (GET_CODE (XEXP (X, 0)) == REG \
&& REG_OK_FOR_BASE_P (XEXP (X, 0)) \
&& GET_CODE (XEXP (X, 1)) == CONST_INT) \
goto ADDR; \
if (GET_CODE (XEXP (X, 1)) == REG \
&& REG_OK_FOR_BASE_P (XEXP (X, 0)) \
&& GET_CODE (XEXP (X, 0)) == CONST_INT) \
goto ADDR; \
} \
}
/* Try machine-dependent ways of modifying an illegitimate address
to be legitimate. If we find one, return the new, valid address.
This macro is used in only one place: `memory_address' in explow.c.
OLDX is the address as it was before break_out_memory_refs was called.
In some cases it is useful to look at this to decide what needs to be done.
MODE and WIN are passed so that this macro can use
GO_IF_LEGITIMATE_ADDRESS.
It is always safe for this macro to do nothing. It exists to recognize
opportunities to optimize the output.
For the vax, nothing needs to be done. */
#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) {}
/* Go to LABEL if ADDR (a legitimate address expression)
has an effect that depends on the machine mode it is used for. */
#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL)
/* Specify the machine mode that this machine uses
for the index in the tablejump instruction. */
#define CASE_VECTOR_MODE SImode
/* Define this if the case instruction expects the table
to contain offsets from the address of the table.
Do not define this if the table should contain absolute addresses. */
/* #define CASE_VECTOR_PC_RELATIVE */
/* Specify the tree operation to be used to convert reals to integers. */
#define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
/* This is the kind of divide that is easiest to do in the general case. */
#define EASY_DIV_EXPR TRUNC_DIV_EXPR
/* Define this as 1 if `char' should by default be signed; else as 0. */
#define DEFAULT_SIGNED_CHAR 1
/* This flag, if defined, says the same insns that convert to a signed fixnum
also convert validly to an unsigned one. */
#define FIXUNS_TRUNC_LIKE_FIX_TRUNC
/* Max number of bytes we can move from memory to memory
in one reasonably fast instruction. */
#define MOVE_MAX 8
/* Define this if zero-extension is slow (more than one real instruction). */
/* #define SLOW_ZERO_EXTEND */
/* Nonzero if access to memory by bytes is slow and undesirable. */
#define SLOW_BYTE_ACCESS 0
/* Define if shifts truncate the shift count
which implies one can omit a sign-extension or zero-extension
of a shift count. */
/* #define SHIFT_COUNT_TRUNCATED */
/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
is done just by pretending it is already truncated. */
#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
/* Specify the machine mode that pointers have.
After generation of rtl, the compiler makes no further distinction
between pointers and any other objects of this machine mode. */
#define Pmode SImode
/* A function address in a call instruction
is a byte address (for indexing purposes)
so give the MEM rtx a byte's mode. */
#define FUNCTION_MODE QImode
/* Compute the cost of computing a constant rtl expression RTX
whose rtx-code is CODE. The body of this macro is a portion
of a switch statement. If the code is computed here,
return it with a return statement. Otherwise, break from the switch. */
#define CONST_COSTS(RTX,CODE,OUTER_CODE) \
case CONST_INT: \
/* Constant zero is super cheap due to clr instruction. */ \
if (RTX == const0_rtx) return 0; \
if ((unsigned) INTVAL (RTX) < 077) return 1; \
case CONST: \
case LABEL_REF: \
case SYMBOL_REF: \
return 3; \
case CONST_DOUBLE: \
return 5;
/*
* We can use the BSD C library routines for the gnulib calls that are
* still generated, since that's what they boil down to anyways.
*/
/* #define UDIVSI3_LIBCALL "*udiv" */
/* #define UMODSI3_LIBCALL "*urem" */
/* Check a `double' value for validity for a particular machine mode. */
/* Note that it is very hard to accidentally create a number that fits in a
double but not in a float, since their ranges are almost the same. */
#define CHECK_FLOAT_VALUE(mode, d) \
if ((mode) == SFmode) \
{ \
if ((d) > 1.7014117331926443e+38) \
{ error ("magnitude of constant too large for `float'"); \
(d) = 1.7014117331926443e+38; } \
else if ((d) < -1.7014117331926443e+38) \
{ error ("magnitude of constant too large for `float'"); \
(d) = -1.7014117331926443e+38; } \
else if (((d) > 0) && ((d) < 2.9387358770557188e-39)) \
{ warning ("`float' constant truncated to zero"); \
(d) = 0.0; } \
else if (((d) < 0) && ((d) > -2.9387358770557188e-39)) \
{ warning ("`float' constant truncated to zero"); \
(d) = 0.0; } \
}
/* Tell final.c how to eliminate redundant test instructions. */
/* Here we define machine-dependent flags and fields in cc_status
(see `conditions.h'). No extra ones are needed for the vax. */
/* Store in cc_status the expressions
that the condition codes will describe
after execution of an instruction whose pattern is EXP.
Do not alter them if the instruction would not alter the cc's. */
#define NOTICE_UPDATE_CC(EXP, INSN) \
CC_STATUS_INIT;
/* Control the assembler format that we output. */
/* Output the name of the file we are compiling. */
#define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \
do { fprintf (STREAM, "\t.file\t"); \
output_quoted_string (STREAM, NAME); \
fprintf (STREAM, "\n"); \
} while (0)
/* Output at beginning of assembler file. */
#define ASM_FILE_START(FILE) fprintf (FILE, "");
/* Output to assembler file text saying following lines
may contain character constants, extra white space, comments, etc. */
#define ASM_APP_ON ""
/* Output to assembler file text saying following lines
no longer contain unusual constructs. */
#define ASM_APP_OFF ""
/* Output before read-only data. */
#define TEXT_SECTION_ASM_OP "\t.inst"
/* Output before writable data. */
#define DATA_SECTION_ASM_OP "\t.var"
/* How to refer to registers in assembler output.
This sequence is indexed by compiler's hard-register-number (see above). */
#define REGISTER_NAMES \
{".r0", ".r1", ".r2", ".r3", ".r4", ".r5", ".r6", ".r7", ".r8", \
".r9", ".r10", ".r11", ".r12", ".r13", ".r14", ".sp"}
/* This is BSD, so it wants DBX format. */
/* #define DBX_DEBUGGING_INFO */
/* How to renumber registers for dbx and gdb.
Vax needs no change in the numeration. */
#define DBX_REGISTER_NUMBER(REGNO) (REGNO)
/* Do not break .stabs pseudos into continuations. */
#define DBX_CONTIN_LENGTH 0
/* This is the char to use for continuation (in case we need to turn
continuation back on). */
#define DBX_CONTIN_CHAR '?'
/* Don't use the `xsfoo;' construct in DBX output; this system
doesn't support it. */
#define DBX_NO_XREFS
/* This is how to output the definition of a user-level label named NAME,
such as the label on a static function or variable NAME. */
#define ASM_OUTPUT_LABEL(FILE,NAME) \
do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
/* This is how to output a command to make the user-level label named NAME
defined for reference from other files. */
#define ASM_GLOBALIZE_LABEL(FILE,NAME) \
do { fputs ("\t.extdef\t", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
/* This is how to output a reference to a user-level label named NAME. */
#define ASM_OUTPUT_LABELREF(FILE,NAME) \
fprintf (FILE, "%s", NAME)
/* This is how to output an internal numbered label where
PREFIX is the class of label and NUM is the number within the class. */
#define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
fprintf (FILE, ".%s%d:\n", PREFIX, NUM)
/* This is how to store into the string LABEL
the symbol_ref name of an internal numbered label where
PREFIX is the class of label and NUM is the number within the class.
This is suitable for output with `assemble_name'. */
#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
sprintf (LABEL, ".%s%d", PREFIX, NUM)
/* This is how to output an assembler line defining a `double' constant.
It is .dfloat or .gfloat, depending. */
#define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
{ union {double d; int i[2]; } tem; \
tem.d = (VALUE); \
fprintf (FILE, "\t.data\t%d{32}, %d{32}\n", tem.i[0], tem.i[1]); }
/* This is how to output an assembler line defining a `float' constant. */
#define ASM_OUTPUT_FLOAT(FILE,VALUE) \
{ union {float f; int i; } tem; \
tem.f = (VALUE); \
fprintf (FILE, "\t.data %d{32}\n", tem.i); }
/* This is how to output an assembler line defining an `int' constant. */
#define ASM_OUTPUT_INT(FILE,VALUE) \
( \
fprintf (FILE, "\t.data\t"), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "{32}\n"))
#define ASM_OUTPUT_DOUBLE_INT(FILE,VALUE) \
{ \
fprintf (FILE, "\t.data\t"); \
if (GET_CODE (VALUE) == CONST_DOUBLE) \
{ \
fprintf (FILE, "%d", CONST_DOUBLE_HIGH (VALUE)); \
fprintf (FILE, "{32}, "); \
fprintf (FILE, "%d", CONST_DOUBLE_LOW (VALUE)); \
fprintf (FILE, "{32}\n"); \
} else if (GET_CODE (VALUE) == CONST_INT) \
{ \
int val = INTVAL (VALUE); \
fprintf (FILE, "%d", val < 0 ? -1 : 0); \
fprintf (FILE, "{32}, "); \
fprintf (FILE, "%d", val); \
fprintf (FILE, "{32}\n"); \
} else abort (); \
}
/* Likewise for `char' and `short' constants. */
#define ASM_OUTPUT_SHORT(FILE,VALUE) \
( fprintf (FILE, "\t.data\t"), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "{16}\n"))
#define ASM_OUTPUT_CHAR(FILE,VALUE) \
( fprintf (FILE, "\t.data\t"), \
output_addr_const (FILE, (VALUE)), \
fprintf (FILE, "{8}\n"))
/* This is how to output an assembler line for a numeric constant byte. */
#define ASM_OUTPUT_BYTE(FILE,VALUE) \
fprintf (FILE, "\t.data\t%d{8}\n", (VALUE))
/* This is how to output an insn to push a register on the stack.
It need not be very fast code. */
#define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
fprintf (FILE, "\tsubi.64\t4,.sp\n\tst.32\t%s,[.sp]\n", reg_names[REGNO])
/* This is how to output an insn to pop a register from the stack.
It need not be very fast code. */
#define ASM_OUTPUT_REG_POP(FILE,REGNO) \
fprintf (FILE, "\tld.32\t%s,[.sp]\n\taddi.64\t4,.sp\n", reg_names[REGNO])
/* This is how to output an element of a case-vector that is absolute.
(The Vax does not use such vectors,
but we must define this macro anyway.) */
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
fprintf (FILE, "\t.data .L%d{32}\n", VALUE)
/* This is how to output an element of a case-vector that is relative. */
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \
fprintf (FILE, "\t.data .L%d-.L%d{32}\n", VALUE, REL)
/* This is how to output an assembler line
that says to advance the location counter
to a multiple of 2**LOG bytes. */
#define ASM_OUTPUT_ALIGN(FILE,LOG) \
if (LOG!=0) fprintf (FILE, "\t.align\t%d\n", (LOG)); else 0
/* This is how to output an assembler line
that says to advance the location counter by SIZE bytes. */
#define ASM_OUTPUT_SKIP(FILE,SIZE) \
fprintf (FILE, "\t.space %d\n", (SIZE))
/* This says how to output an assembler line
to define a global common symbol. */
#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
( fputs (".comm ", (FILE)), \
assemble_name ((FILE), (NAME)), \
fprintf ((FILE), ",%d\n", (ROUNDED)))
/* This says how to output an assembler line
to define a local common symbol. */
#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
( fputs (".bss ", (FILE)), \
assemble_name ((FILE), (NAME)), \
fprintf ((FILE), ",%d,%d\n", (SIZE),(ROUNDED)))
/* Store in OUTPUT a string (made with alloca) containing
an assembler-name for a local static variable named NAME.
LABELNO is an integer which is different for each call. */
#define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
/* Define the parentheses used to group arithmetic operations
in assembler code. */
#define ASM_OPEN_PAREN "("
#define ASM_CLOSE_PAREN ")"
/* Define results of standard character escape sequences. */
#define TARGET_BELL 007
#define TARGET_BS 010
#define TARGET_TAB 011
#define TARGET_NEWLINE 012
#define TARGET_VT 013
#define TARGET_FF 014
#define TARGET_CR 015
/* Print an instruction operand X on file FILE.
CODE is the code from the %-spec that requested printing this operand;
if `%z3' was used to print operand 3, then CODE is 'z'. */
#define PRINT_OPERAND(FILE, X, CODE) \
{ \
if (CODE == 'r' && GET_CODE (X) == MEM && GET_CODE (XEXP (X, 0)) == REG) \
fprintf (FILE, "%s", reg_names[REGNO (XEXP (X, 0))]); \
else if (GET_CODE (X) == REG) \
fprintf (FILE, "%s", reg_names[REGNO (X)]); \
else if (GET_CODE (X) == MEM) \
output_address (XEXP (X, 0)); \
else \
{ \
/*debug_rtx(X);*/ \
putc ('=', FILE); \
output_addr_const (FILE, X); } \
}
/* Print a memory operand whose address is X, on file FILE.
This uses a function in output-vax.c. */
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
print_operand_address (FILE, ADDR)
/* Functions used in the md file. */
extern char *cmp_set();
extern char *cmp_jmp();
/* These are stubs, and have yet to bee written. */
#define TRAMPOLINE_SIZE 26
#define TRAMPOLINE_TEMPLATE(FILE)
#define INITIALIZE_TRAMPOLINE(TRAMP,FNADDR,CXT)